Gritton & Associates is a manufacturers representative for the residential, commercial and industrial markets. Our expertise and product lines are focused on HVAC, plumbing and steam systems.
For over 75 years, Ace storage tanks have been fabricated by skilled craftsmen using the highest quality A.S.M.E. code certified materials. All fabrication, welding, and testing are performed in strict accordance with A.S.M.E codes, and are continuously checked by A.S.M.E./National Board Inspections.
Available Ratings
SD
125 psig ASME Section VIII
SJ
150 psig ASME Section VIII
SW
125 psig ASME Section IV
Available Linings
Glass (G)
Atahco Cement (A)
Pre-Krete (K)
Glass lining shall be ACE GLASS™ as applied by Ajax Boiler Inc. The inside surface of the tank shall be thoroughly cleaned prior to application. Ceramic glass lining shall be fused to the steel shell at 1500ºF. Lining shall have the same coefficient of expansion as the steel shell and be able to withstand abrupt changes in temperature. Lining shall be of a quality material and application as to resist corrosion. Magnesium and anodes are provided to help reduce electrolysis conditions. Suitable for potable water up to a maximum of 160ºF.
Cement lining shall be ATAHCO™ as supplied by Ajax Boiler Inc., or an approved equal. The inside surface of the tank shall be thoroughly cleaned prior to application. The entire surface shall then be coated with low soluble cement to a minimum thickness of 1/4″ for tanks 48″ diameter and under; and 3/8″ thick for tanks 54″ in diameter and over. The cement shall be of a type that resists corrosion and shall have the same coefficient of expansion as the steel shell. Suitable for potable water up to a maximum of 180ºF.
An alternate to ATAHCO™ Cement, PRE-KRETE G-8 lining is suitable for storage of soft water with pH factor below 7, acidic water conditions. For steam condensate or applications with pH factor of 7 or greater, use PRE-KRETE C-17. The inside surface of the tank shall be thoroughly cleaned prior to application. The applied thickness is 5/8″ and can withstand temperature to 350ºF (standard design). For higher temperatures please contact factory.
Storage Tanks
SD Horizontal | SD Vertical | SD Vertical w/ Ins| SJ Horizontal | SJ Vertical | SJ Vertical w/ Ins | SW Vertical
For over 75 years, Ace storage tanks have been fabricated by skilled craftsmen using the highest quality A.S.M.E. code certified materials. All fabrication, welding, and testing are performed in strict accordance with A.S.M.E codes, and are continuously checked by A.S.M.E./National Board Inspections.
Available Ratings
125 psig ASME Section VIII
150 psig ASME Section VIII
125 psig ASME Section IV
Available Linings
Available Sizes