Gritton & Associates is a manufacturers representative for the residential, commercial and industrial markets. Our expertise and product lines are focused on HVAC, plumbing and steam systems.
Aero Tech manufactures a full line of ceiling systems, including hydronic radiant, custom acoustic, security and hybrid ceiling systems. Aero Tech’s hydronic radiant ceiling panels are widely recognized for outstanding quality of design and performance. The wide range of panels will meet most heating requirements.
Extruded linear hydronic radiant ceiling panels are constructed of 5″, 6″, 8″ or 9″ wide extruded aluminum strips. The extruded panels interlock by means of tongueand- groove joints and are held together as a unit by stiffeners on the back. Active strips have 0.505″ ID copper tube inserted into “U”shaped channels on the back of the extrusion. Face configurations are available in V-groove, fluted and smooth.
Aero Tech’s formed metal and snap-in panels are constructed of 0.040″ (1 mm) thick aluminum sheets with 6 passes of 0.505″ (12.8 mm) ID copper tube metallurgically bonded to each aluminum sheet. The panels are finished in baked enamel for easy washability and a long life span without repainting. Textured and silkscreened finishes are available. Formed metal hydronic radiant ceiling panels can be perforated so that the ceiling absorbs sound when acoustical insulation is installed on the back of the panels. Insulation also minimizes upward heat flow from the back of the panels. Panel sizes are 2′ × 2′ and 2′ × 4′ .
Radiant Ceiling Panels
Engineering Guide
Aero Tech manufactures a full line of ceiling systems, including hydronic radiant, custom acoustic, security and hybrid ceiling systems. Aero Tech’s hydronic radiant ceiling panels are widely recognized for outstanding quality of design and performance. The wide range of panels will meet most heating requirements.
Extruded Aluminum Hydronic Radiant Panels
Technical Brochure – Standard | Technical Brochure – Low Pressure Drop
Extruded linear hydronic radiant ceiling panels are constructed of 5″, 6″, 8″ or 9″ wide extruded aluminum strips. The extruded panels interlock by means of tongueand- groove joints and are held together as a unit by stiffeners on the back. Active strips have 0.505″ ID copper tube inserted into “U”shaped channels on the back of the extrusion. Face configurations are available in V-groove, fluted and smooth.
Formed Metal Hydronic Radiant Panels
Technical Brochure
Aero Tech’s formed metal and snap-in panels are constructed of 0.040″ (1 mm) thick aluminum sheets with 6 passes of 0.505″ (12.8 mm) ID copper tube metallurgically bonded to each aluminum sheet. The panels are finished in baked enamel for easy washability and a long life span without repainting. Textured and silkscreened finishes are available. Formed metal hydronic radiant ceiling panels can be perforated so that the ceiling absorbs sound when acoustical insulation is installed on the back of the panels. Insulation also minimizes upward heat flow from the back of the panels. Panel sizes are 2′ × 2′ and 2′ × 4′ .